500 MHz Passive Probes

P6139B and P5050B Datasheet

The P6139B and P5050B probes are high bandwidth, high impedance 10X passive voltage probes with 10 MΩ input resistance. These probes feature a small probe head and sharp tip that makes it easier to probe dense circuitry. The P6139B and P5050B share similar electrical specifications but support Tektronix oscilloscopes with different compensation ranges. Visit the Oscilloscope Probe & Accessory Selector Tool located at www.tek.com/probes to ensure the correct probe is selected for your oscilloscope.

Key performance specifications

500 MHz probe bandwidth
Large input impedance at the probe tip (10 MΩ, 8pF)
10X attenuation factor
300 v CAT II input voltage

Ease-of-use features

Compact probe head for probing small geometry circuit elements
Small probe body for enhanced visibility to the Device-Under-Test
Replaceable probe tip cartridges
Large accessory set for versatile connectivity

Connectivity

P6139B and P5050B feature the TekProbe interface for direct BNC connection for oscilloscopes with 1 MΩ inputs.
Integrated oscilloscope and probe measurement systems feature intelligent communication that automatically scales and adjusts units on the oscilloscope display.

Applications

Low power devices
Service
Manufacturing engineering
Test research and development

Specifications

All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.

Model overview

Specification	P6139B	P5050B
Attenuation	10X	10X
Dynamic range	300 V CAT II	300 V CAT II
Bandwidth	500 MHz	500 MHz
Input impedance at the probe tip	10 MΩ, 8 pF	10 MΩ, 11 pF
Compensation range	8 pF to 18 pF	16 pF to 22 pF
Cable length	1.3 m	1.3 m

Environmental specifications

Characteristic	Description
Temperature
Operating	Comp box: –15 °C (+5 °F) to +50 °C (+122 °F)
Operating	Probe body: –55 °C (–67 °F) to +65 °C (+149 °F)
Nonoperating	–62 °C to +85 °C (–80 °F to +185 °F)
Humidity
Operating	Comp box: Up to 95% relative humidity (%RH) up to +30 °C, up to 75% RH and up to +50 °C. Noncondensing
Operating	Probe body and cable: Up to 95% relative humidity (%RH) up to +30 °C, up to 85% RH and up to +65 °C. Noncondensing
Nonoperating	Up to 85% relative humidity and up to +85 °C. Noncondensing
Altitude
Operating	3.0 km (10,000 ft) maximum
Nonoperating	15 km (50,000 ft) maximum

Ordering information

Models

P6139B: 500 MHz general purpose passive probe with TekProbe I interface
P5050B: 500 MHz general purpose passive probe with TekProbe I interface

Standard accessories

Description	Quantity included	Reorder part number
Long ground spring	2	016-2028-xx
6" alligator ground lead	1	196-3521-xx
Standard hook tip	1	013-0362-xx
Universal IC cap, 3.8 mm	1	013-0366-xx
Marker band set, 2 each of 5 colors	1	016-0633-xx
Adjustment tool	1	003-1433-xx
Manual (English only)	1	071-2710-xx

Recommended accessories

Description	Quantity included	Reorder part number
Short ground spring	2	016-2034-xx
12” alligator ground lead	1	196-3512-xx
6” clip-on ground lead	1	196-3198-xx
Micro hook tip	1	013-0363-xx
MicroCKT test tip	1	206-0569-xx
BNC to probe tip adapter; unterminated	1	013-0367-xx
PCB to probe tip adapter	10	016-2016-xx
Compact probe tip chassis mount test jack	1	131-8831-xx
P6139B replacement tip	1	206-0635-xx
P5050B replacement tip	1	206-0636-xx