STANDARD PERFORMANCE FOR THE MOST ESSENTIAL NEEDS
2110 : 5½-Digit Dual-Display Digital Multimeter
- Measure and display two parameters concurrently
- Sample a signal at 50,000 readings/s
- Measure temperature and capacitance
- Interface to a PC or a system with the USB interface or the optional GPIB interface
- Connect to either the front terminals or the rear terminals
- Measure any parameter with fully-specified accuracies
- Interface to a PC with the USB-TMC compliant protocol
ENHANCED PERFORMANCE WITH A TOUCHSCREEN GRAPHICAL USER INTERFACE
DMM6500 6½-Digit Bench/System Digital Multimeter
- Capture complex signals and transients with up to 1 Msample/s 16-bit digitizing
- Make low level measurements with 100 nV, 10 pA, and 1 µΩ sensitivities
- Measure with superior 0.0025% basic, 1-year, DC Volt accuracy and 0.0075% basic, 1-year resistance accuracy
- Analyze data and display waveform plots on the 5 inch (12.7 cm) touchscreen display
- Measure power circuit current up to 10 A
- Interface to a PC with LAN/LXI and USB-TMC interfaces or optional GPIB or RS-232 interfaces
- Test up to 10 DUTs in one test setup with the optional plug-in scanner cards
NO COMPROMISE: HIGH SPEED AND HIGH ACCURACY
DMM7510 7½-Digit Graphical Sampling Multimeter
- Capture IoT wireless device load current transmit bursts wit 18-bit, 1Msample/s digitizing
- Measure ultra-low sleep mode currents on processors and products with 1 pA current sensitivity
- Hold DUTs to tight test tolerances using voltage measurements with accuracies as low as 14 ppm
- Store up to 27.5 million readings for profiling load current waveforms and transient waveforms
- Take measurements as fast as 26,000 readings/s for high throughput testing
- Get fast insight into waveform characteristics with the 5 inch (12.7 cm) touchscreen display
- Execute custom test scripts and control other instruments with the built-in test script processing language
- Interface to a PC with either LXI LAN, USB, or GPIB interfaces
SAVE RACK SPACE AND DOUBLE TEST CAPACITY IN MANUFACTURING
DMM7512 Dual Channel 7½-Digit Sampling Multimeter
- Double measurement performance with two independent, identical 3½- to 7½-digit DMMs similar to the DMM7510 in a 1U high, full rack width chassis
- Capture waveforms such as battery drain currents with up to 1 Msample/s, 18-bit digitizing and 0.1 nA and 1 µV sensitivities
- Simultaneously capture voltage and current waveforms to determine a device’s instantaneous peak and average power
- Evaluate low power components including quiescent or sleep mode states with 10 nV, 0.1 µΩ, and 1 pA sensitivities
- Make high accuracy, low resistance measurements with offset compensated Ohms, four-wire measurement, and dry circuit voltage control
- Maximize test uncertainty ratios based on 1-year DV volts accuracies as good a 14 ppm.
- Reduce test time by executing test scripts with the Embedded Test Script Processor, which saves PC command communication overhead.
- Obtain tight synchronization between the two DMMs using TSP-Link® communication
HIGH ACCURACY WITH HIGH RESOLUTION
2010 Low Noise 7½-Digit Autoranging Multimeter
- Resolve low voltages with the 100 nVrms noise floor
- Make automatic ratio measurements on two voltages with the front and rear inputs
- Minimize device self-heating with low power resistance measurements
- Avoid breaking down oxides or films on relay contacts and connectors with the dry circuit test function
- Test up to 10 DUTs with an optional voltage or temperature plug-in scan card
- Interface to a PC with the RS-232 or the GPIB interface
2001 7½-Digit High Performance Multimeter
- Capture spikes as narrow as 1µs with the peak detector function
- Perform in-circuit current measurements without breaking the circuit
- Automatically separate components based on measurement limits using the Binning function
- Measure up to 10 channels of voltage or 9 channels of temperature with the optional plug-in scanner cards
- Make high accuracy, 2 MHz bandwidth AC voltage measurements for control system analysis
- Connect to a PC with the GPIB interface
2001 8½-Digit High Performance Multimeter
- Make the most accurate voltage measurements with tolerances as narrow as 10 ppm
- Capture spikes as narrow as 1 µs with the peak detector function
- Perform in-circuit current measurements without breaking the circuit
- Automatically separate components based on measurement limits using the Binning function
- Measure up to 10 channels of voltage or 9 channels of temperature with the optional plug-in scanner cards
- Make high accuracy, 2 MHz bandwidth AC voltage measurements for control system analysis
- Connect to a PC with the GPIB interface
PRECISION MULTI-CHANNEL MEASUREMENTS FOR DATA ACQUISITION
2750 Multimeter/Switch Systems
- Build a test system as large as 200 differential input channels
- Design a versatile system using up to 5 different models of the 7700-series plug-in switch modules in a 2750
- Measure low resistive components with 1 µΩ sensitivity
- Use the dry circuit function to protect sensitive devices from damage and to minimize self-heating errors during testing
- Make measurements with the high performance 6½-digit DMM
- Interface to a PC with the GPIB or RS-232 interface
PRECISION MULTI-CHANNEL MEASUREMENTS WITH BOTH MORE PERFORMANCE AND WITH THE MOST SIMPLIFIED SETUP PROCEDURE
DAQ6510 Data Acquisition and Logging, Multimeter System
- Set up a test in minutes with the 5-inch (12.7 cm) touchscreen display and graphical user interface
- Test low power devices with current sensitivity down to 10 pA
- Save upgrade costs by using the same plug-in switch modules as the 2750
- Monitor up to 80 channels of thermocouple, RTD, or thermistor temperature measurements
- Monitor fast-changing signals with the 1 Msample/s, 16-bit digitizer
- Make high precision measurements with the high performance 6½-digit DMM
- Interface to a PC with either LAN LXI or USB or add an RS-232 or a GPIB option
- Control other instruments and execute a test with the built-in scripting code and the Test Script Processor (TSP®), TSP-Link® I/O option
HIGH CHANNEL COUNT AND PRECISION MEASUREMENT DATA ACQUISITION SYSTEMS
3706A System Switch/Multimeter
- Build a test system with as many as 576 two-wire or 720 one-wire multiplexed channels or with up to 2,688 matrix crosspoints
- Fill up to 6 slots with 10 different 3700 Series plug-in switch modules
- Make the most accurate measurements with the 7½-digit DMM and 13 measurement functions
- Maximize throughput with measurement speeds up to 14,100 readings/s
- Minimize time-consuming interaction with a PC by using the 3706A as a master system controller using Keithley’s internal Test Script Processor (TSP™) software
- Control other LAN-based instruments with the TSP-Link interface
- Interface to a PC with LAN/LXI, USB, or GPIB interfaces