Contact us
Call
Call us at
Available 6:00 AM – 5:00 PM (PST) Business Days
Download
Download Manuals, Datasheets, Software and more:
Feedback
Preamplifier for Tektronix EMC pre-compliance
EMI-PREAMP (Com-Power PAM-103 offered by Tektronix)
EMI-PREAMP (Com-Power PAM-103 offered by Tektronix)
The EMI-PREAMP preamplifier is intended for improving measurement system sensitivity during EMC compliance testing. With a frequency range of 1 to 1000 MHz and a gain of 33 dB, it amplifies the signals that were previously hidden below the noise floor of the EMI receiver so that they can be seen and measured. The preamplifier has a gain variation of ±3 dB for the entire frequency range to reduce measurement errors. It can be powered by the rechargeable NimH batteries included when an external power source is not available.
Key features
- Wide frequency range (1 MHz to 1 GHz)
- Internal battery or AC adapter operation (>13 hours per charge)
- High gain, low noise figure (33 dB Gain (typical)) (3.3 dB noise figure)
- Individual calibration included
Specifications
- Preamplifier
- Frequency range
- 1 MHz –1 GHz
- Preamplifier gain
- 33 dB (3 dB)
- Linear RF input range
- < -30 dBuV – 89 dBuV
- POUT at 1 dB compression
- 18.3 dBm
- POUT at 3 dB intercept (IP3)
- 32 dBm
- Noise figure
- < 3.3 dB
- Input sensitivity
- -30 dBuV (< 31.6 nV)
- RF input/output ports
- 50 Ω N-type (female)
- Return loss (RF input/output ports )
- 29.5 dB (minimum), 44 dB (average)
- VSWR (RF input/output ports)
- 1.69:1 (maximum), 1.25:1 (average)
- Reverse isolation
- >40 dB (output port to input port)
- Operating temperature
- 0° to 40° C (32° to 104° F)
- Maximum RF input ratings
- 107 dBμV (225 mV), 0 dBm (1 mW), 2 VDC
- Power supply (input)
- 100 to 240 V AC, 50/60 Hz; IEC60320 C14 receptacle
- Power supply (output)
- + 15 V ±1%; 4 A maximum
- Battery runtime
- >13 Hours (with new, fully-charged batteries)
- Dimensions
- 6 cm x 16.7 cm x 21 cm
- Weight
- 1.45 kg
Ordering information
EMI-PREAMP preamplifier and related accessories
Item | Description |
---|---|
EMI-PREAMP | 1 MHz to 1 GHz preamplifier |
119-8727-00 | Power supply: AC-DC, Desktop; 90-264VAC 47-63HZ, IEC320-C14 IN; 5 VDC 4 A, Cable with 5.5MM OD 2.5MM ID Barrel out; comes with 133-0099-00 ADAPTER PLUG; Safety controlled |
International power plugs
- Opt. A0
- North America power plug (115 V, 60 Hz)
- Opt. A1
- Universal Euro power plug (220 V, 50 Hz)
- Opt. A2
- United Kingdom power plug (240 V, 50 Hz)
- Opt. A3
- Australia power plug (240 V, 50 Hz)
- Opt. A4
- North America power plug (240 V, 50 Hz)
- Opt. A5
- Switzerland power plug (220 V, 50 Hz)
- Opt. A6
- Japan power plug (100 V, 50/60 Hz)
- Opt. A10
- China power plug (50 Hz)
- Opt. A11
- India power plug (50 Hz)
- Opt. A12
- Brazil power plug (60 Hz)
- Opt. A99
- No power cord